ELEGOO 0.96 Inch OLED Display Screen Module, Self-Luminous, SSD1306, 3

£8.19

Three Displays For More Projects: Build a sensor dashboard, robot status panel and classroom demo at the same time, or keep spare modules ready for testing; each compact screen delivers 128x64 graphics with self-luminous pixels and no backlight
Fixed Yellow-Blue Zones Make Status Information Easy To Scan: Use the yellow upper band for headings, alerts or icons and the blue lower area for readings and menus; the display colors are fixed by the OLED panel rather than programmable RGB, and the screen does not support touch input
Four-Wire I2C Connection Saves Controller Pins: Connect GND, VCC, SCL and SDA according to the module labels, scan the I2C bus and use the default 7-bit address 0x3C; the 0x78 PCB marking represents the corresponding 8-bit write-address format used by some documentation
Works With Common 3.3 V & 5 V Project Platforms: Add compact visual feedback to compatible microcontroller and single-board computer projects, but verify the module pin order, supply voltage, I2C logic levels, pull-up voltage and SSD1306 software configuration before powering
Three Modules Plus Ten Dupont Wires: Includes 3 OLED display modules, 5 female-to-female and 5 male-to-female jumper wires; controller boards, breadboards and enclosures are not included, and multiple displays on one I2C bus require unique addresses where supported or an I2C multiplexer

ELEGOO 0.96 Inch OLED Display Screen Module, Self-Luminous, SSD1306, 3PCS